bending stress

3D Bending Stress Finite Element Analysis for Helical Bevel Gears

螺旋锥齿轮的三维弯曲应力有限元分析

Bending stress analysis on gears of heavy duty automobile gear box based on assembly

基于总成的重型汽车变速箱齿轮弯曲应力分析

The Classification of Local Bending Stress of Shell and Primary Structure Method

壳体局部弯曲应力的分类及其一次结构法

Study of local bending stress in bottom flange of ⅰ-beam crane rail

起重机工字钢轨下翼缘局部弯曲应力的研究

Analysis of Bending Stress in Perpendicular Face Gear

正交面齿轮弯曲应力的分析

The life of bending fretting fatigue was significantly influenced by the alternating stresses. The higher stress level was, the lower fatigue life occurred. The S-N curves of bending fretting fatigue appeared shapes of C type.

对于弯曲微动疲劳，交变应力对寿命的影响十分显著，应力水平越高，微动疲劳寿命越低，弯曲微动疲劳的S-N曲线呈C曲线型。

Calculation of deformation of rod or tubing with initial bending stress

具有初弯曲的杆（管）柱变形计算

An analysis has been made on bending stress for practical stay cable.

对斜拉索工程实例进行了弯曲应力分析。

Because the stress field in three-point bending is not exactly same as the uniaxial stress field, the relationship between the two principal strains departures from Hooke's law.

由于三点弯曲过程中产生的非纯单向应力特性，使得两个主应变之间的关系偏离了虎克定律。

By creating two kinds of stress environment in the same animal model, we performed a three-point bending test and a compressing test on the rat femurs growing under different stress conditions to characterize the effect of stress on bone mechanical properties.

在同一动物个体中创造两种应力环境，对不同受力条件下生长的大鼠股骨进行三点弯曲试验和压缩试验，研究应力对骨力学性能的影响。

Drill string receives the complicated stress which is tension-compression stress, torsion stress, bending stress, etc.

在长期工作中，钻具承受拉伸、压缩、弯曲和扭转等复杂应力。

Based on Layered-Slipping Model for Bending Stress Analysis of Stay Cables

基于分层滑移模型的斜拉索弯曲应力分析

Radial stress of combined curved beam and its influence on bending stress

组合曲梁的径向应力及其对正应力的影响

The remote bending stress at the plate surface was measured.

板表面处的远场弯曲应力已被测出.

Axial force has a great effect on deformation of rod or tubing with initial bending stress.

轴向力对具有初弯曲的杆(管)柱变形影响很大.

Simulation Analysis of Bending Stress of Solid Core Post Insulator by Finite Element Method

棒形支柱瓷绝缘子弯曲应力的有限元仿真分析

Crack in prestressed concrete box girder due to bending stress

弯曲应力引起的预应力混凝土箱梁开裂

Bending stress in design by analysis for large opening in cylinder of pressure vessels

压力容器圆筒大开孔应力分析设计中的弯曲应力

The Comparative Study of the Bending Stress and Elastic Deformation Calculation of Gear tooth

齿根应力与轮齿弹性变形的计算方法进展与比较研究

Accurate Calculation of Time History of Tooth Bending Stress for Hypoid Gears

准双曲面齿轮弯曲应力过程的精确计算

The bending stress varies axially while the average axial stress changes a little.

此外,弯曲应力沿轴向有所变化,而平均应力基本不变.

A New Computational Method for Bending Stress of Wire Rope

钢丝绳弯曲应力的计算方法

Actually a bending stress a combination of tensile and compressive stresses.

实际上弯曲应力是压力和张力的综合.

Statistical analysis of bending stress intensity factors for cracked plate with uncertain parameters

具有随机参数的含裂纹板弯曲应力强度因子的统计分析

Effects of Machining on Fatigue Strength under Reversed Bending Stress

机械加工对弯曲疲劳强度的影响

Study on bending stress of main cable in long-span suspension bridge

大跨度悬索桥主缆弯曲应力试验研究

The bending stress is zero for the element at B.

在B处的单元体,弯曲应力为零.

Bending Stress of Cross-section in Track of Hydraulic Steel Gate

水工钢闸门轨道横截面弯曲应力分析

With the increase of D, the relative displacement and bending stress are increased;

随管径增大，横向相对位移增大，弯曲应力增大；

Approximate formulas for calculating the maximum bending stress are given.

文中并给出计算弯曲应力的近似公式。